Still Night Takeout Treat Box for Monster Mash IRBH

inKing Royalty Blog Hop, Octiber 2018, Monster Mash, Halloween #stampcandy

 

Welcome to InKing Royalty’s October Blog Hop! This year’s Blog Hop themes are inspired by popular songs – this month’s song is “Monster Mash.” You can watch a video of the song at the bottom of this blog post. As you can guess, our Blog Hop today is filled with fun projects that are inspired by the spookiest night of the year – Halloween. We are excited to share our creations with you today! After you read my post, I hope you’ll hop over to the next person on the list at the base of this post.

 

Here’s what I made:

Still Night, Cauldron Bubble, Wood Textures, Trick or Treat Halloween Takeout Treat Box, Stampin' Up!, IRBH Monster Mash #stampcandy

 

Still Night, Cauldron Bubble, Wood Textures, Trick or Treat Halloween Takeout Treat Box, Stampin' Up!, IRBH Monster Mash #stampcandy

 

Still Night, Cauldron Bubble, Wood Textures, Trick or Treat Halloween Takeout Treat Box, Stampin' Up!, IRBH Monster Mash #stampcandy

Here’s what I did:

Stamped with the Still Night stamp set:

  • owl in Stazon black ink onto a scrap of Crumb Cake card stock (CS)

Stamped with the Cauldron Bubble stamp set:

  • sentiment in black ink onto a scrap of Crushed Curry CS

Die cut using the Takeout Thinlits:

  • two box pieces from Wood Textures Designer Series Paper (DSP)

Cut using the 1″ Circle Punch:

  • sentiment

Colored using Watercolor Pencils:

  • owl in Early Espresso, Basic Gray, Basic Black, Daffodil Delight, Pumpkin Pie, and Whisper White

Cut using Paper Snips:

  • fussy cut the owl (Seriously, Stampin’ Up!’s Paper Snips are the best scissors for fussy cutting paper!) 

Assembled the card:

  • folded and burnished the score lines in the box pieces with a Bone Folder
  • the bottoms of the two box pieces glued to each other
  • flaps adhered to the inside of the adjacent sides of the box with Tear & Tape
  • sentiment “moon” and owl glued onto the front of the box
  • treats put inside, the closed the box
  • Braided Linen Trim tied around the box and tied in a knot 

 

Here’s the Monster Mash hop:

Thank you for hopping along with us today.  I hope you’ll hop to the next stop, Robin Myren at Songbird Designs by Robin. There’s a lot of inspiration to be found in this group, and you don’t want to miss any of it! If you get stuck during the Blog Hop, please use this line-up as a guide:

  1. Brian King at Stamp with Brian
  2. Shawn de Oliveira at Shawn Stamps
  3. Nina King at InkPaperSequins
  4. Sue Jackson at Just Peachy Stamping
  5. Rachael Shedeed at Bluebonnet Stampin’
  6. Julie DiMatteo at The Paper Pixie
  7. Robbye Hamilton at Miss Hammie’s Crafts
  8. Candy Ford at Stamp Candy <– YOU ARE HERE!
  9. Robin Myren at Songbird Designs by Robin
  10. Lynn Kolcun at Avery’s Owlery
  11. Pam Morris at Tap Tap Stamp

 

Here are today’s colors:

You can click on each one to see all the products that come in that color!

 

Here’s what I used:

Click on these images for more details and to purchase.

Price: $110.00

 

Here’s the song Monster Mash:

Enjoy this video of Bobby Pickett on Bandstand with Dick Clark.

Here’s some cool stuff you should check out:

Thanks for stopping by today, and Sweet Stamping!

 

 

Love What You Do Thank You Card by Debbie Catlett

Today I get to share a card made by one of my amazing Candy Hearts team members, Debbie Catlett. She used the Love What You Do stamp set to create this simple and elegant thank you card.

Here’s what she made:

Love What You Do stamp set, thank you card by Debbie Catlett, Stampin' Up! #stampcandy

 

 

Here’s what (I think) she did:

Cut and scored with my Stampin’ Trimmer:

  • Whisper White Thick card stock (CS) cut to 8-1/2″ x 5-1/2″, then scored in half at 4-1/4″
  • Pear Pizzazz CS cut to 3-1/8″ x 4-7/8″
  • Whisper White CS cut to 3″ x 4-3/4″

Stamped with the Love What You Do stamp set:

  • flowers in Pear Pizzazz ink onto the Whisper White CS layer
  • sentiment in Highland Heather ink onto the Whisper White CS layer

Colored using Stampin’ Blends Markers:

  • flowers in Highland Heather

Assembled the card:

  • burnished the fold in the card base with a Bone Folder
  • Gorgeous Grape ribbon wrapped around the Whisper White CS layer and tied in a knot over the flower stems
  • Whisper White CS layer glued onto the Pear Pizzazz CS layer
  • Pear Pizzazz CS layer glued onto the front of the card base

 

Here are today’s colors:

You can click on each one to see all the products that come in that color!

 

Here’s what she used:

Click on these images for more details and to purchase.

 

Here are the new Stamparatus Accessories!

You can now order individual accessories for your Stamparatus! (Be sure to keep an eye out for more in the future.)

 

Grid paper perfectly sized to fit the Stamparatus, for precision stamp alignment every time. (50 sheets)

Additional plates allow you to have multiple stamp arrangements ready to go! (2 plates)

Extra foam mat for photopolymer stamping. (1 mat)

Stamparatus Accessories Pack includes 2 Stamparatus plates, a foam mat, and grid paper.

Stamparatus Magnets. These rare earth magnets are strong!  They’re also brittle by nature, so be careful not to let them slam together. (2 magnets)

 

 

 

 Here’s some cool stuff you should check out:

Thanks for stopping by today, and Sweet Stamping!

 

 

Frosted Floral Congratulations Card

Today’s card is made with the Frosted Floral Suite, which is really versatile. Here I’ve made a congratulations card, but there are three very different sentiments in the stamp set. And the paper has a 13 different Stampin’ Up! colors, so you can make a plethora of different projects. I used the First Frost stamp set, Frosted Bouquet Framelits Dies, and Frosted Floral Designer Series Paper for this card.

Here’s what I made:

Congratulations card made with First Frost stamp set, Frosted Bouquet dies, Frosted Floral paper by Stampin' Up! #stampcandy

 

Congratulations card made with First Frost stamp set, Frosted Bouquet dies, Frosted Floral paper by Stampin' Up! #stampcandy

 

Here’s what I did:

Cut and scored with my Stampin’ Trimmer:

  • Soft Suede card stock (CS) cut to 4-1/4″ x 11″, then scored in half at 5-1/2″
  • Frosted Floral Designer Series Paper (DSP) cut to 4″ x 5-1/4″ (leaf background)
  • DSP cut to 1-1/2″ x 5-1/4″ (floral pattern)
  • Mint Macaron CS cut to 4″ x 3/4″
  • Shimmery White CS cut to 4″ x 1/2″
  • Whisper White (or Shimmery White) CS cut to 4″ x 5-1/4″ for the inside of the card base

Stamped with the First Frost stamp set:

  • sentiment in Blackberry Bliss ink onto the Shimmer White CS strip
  • one large flower in Gray Granite and Tranquil Tide inks (sponged the ink onto the stamp)
  • two small flowers in Soft Suede ink

Die cut using the Frosted Bouquet Framelits:

  • 3 stamped flowers

Colored using Stampin Write Markers:

  • 3 flower centers in Crushed Curry
  • empty spaces of the 2 small flowers in Petal Pink

Assembled the card:

  • burnished the fold in the card base with a Bone Folder
  • DSP background layer glued onto the front of the card base
  • floral DSP strip glued onto the DSP background layer
  • sentiment glued onto the Mint Macaron CS strip
  • Mint Macaron CS strip glued over the DSP layers
  • 3 flowers glued over the sentiment strip and DSP layers
  • Whisper White CS glued onto the inside of the card base

 

Here are today’s colors:

You can click on each one to see all the products that come in that color!

 

Here’s what I used:

Click on these images for more details and to purchase.

Price: $110.00

 

Here are the new Stamparatus Accessories!

You can now order individual accessories for your Stamparatus! (Be sure to keep an eye out for more in the future.)

 

Grid paper perfectly sized to fit the Stamparatus, for precision stamp alignment every time. (50 sheets)

Additional plates allow you to have multiple stamp arrangements ready to go! (2 plates)

Extra foam mat for photopolymer stamping. (1 mat)

Stamparatus Accessories Pack includes 2 Stamparatus plates, a foam mat, and grid paper.

Stamparatus Magnets. These rare earth magnets are strong!  They’re also brittle by nature, so be careful not to let them slam together. (2 magnets)

 

 

 

 Here’s some cool stuff you should check out:

Thanks for stopping by today, and Sweet Stamping!

 

 

November Paper Pumpkin Sneak Peek

 

Get cozy this Christmas season with Paper Pumpkin! The Paper Pumpkin team designed November’s kit to give you a One-Stop Box™ for your holiday crafting needs. When you subscribe by November 10, you;ll receive the specially-designed box filled with everything you need for a holly-jolly, handmade holiday. 

The holidays are the best time to share our appreciation for others, and nothing does that like a handmade holiday card. November’s kit gives a you everything you need to make plenty of those! (10 cards; 5 each of 2 unique holiday designs.)

Are you new to Paper Pumpkin? The holiday kit is the perfect introduction to this fabulous monthly kit, especially if you’re looking for a fun and easy holiday crafting experience.

Current subscribers are going to love the holiday kit. In fact, you may want to purchase extra kits to give away as gift – plus you’ll want lots of refills!

The November kit makes the perfect gift for your crafty friends this holiday season. Purchase a prepaid code(s) and give them to your friends/family members as gifts. Tell them to redeem their prepaid codes on paperpumpkin.com by November 10 to get the special holiday edition kit!

The box is a great sneak of what’s inside! (See photo at top of this post.)

Coordinating colors:

You can click each color to see coordinating products, to make more, or alternate projects.

 

Remember, subscribers gets all of this PLUS an exclusive stamp set AND an ink spot (mini ink pad.)

Promotion Details

  • New subscribers must subscribe by November 10 to receive the holiday kit.
  • Canceled subscribers must enter active status by November 10 to receive the holiday kit.
  • Current subscribers must remain active through November 10 to receive the holiday kit.
  • Product availability may be limited toward the end of the subscription period.

 

Click to choose a prepaid subscription and save!

CLICK HERE to subscribe month to month.

 

 Here’s more cool stuff to check out:

Thanks for stopping by today, and Sweet Stamping!

 

 

OSAT Blog Hop – Ghouls, Goblins, and Gourds

One Stamp at a Time Blog Hop header

It’s time for the One Stamp at a Time blog hop for October. We’re featuring Halloweeny projects this month. I used the In the Woods Framelits Dies and the Christmas Staircase Thinlits Dies to create the card, which happens to be the invitation to our Halloween party this year. The front of the card is a homey Christmas scene, and the inside is the same scene in the dark, when the frightful creatures come out to play. I used the In the Woods dies along with the Toil & Trouble Designer Series Paper to create the treat bag.

I used only one stamp on this invitation, the one for the garland, mainly because I didn’t have sentiment stamps that said exactly what I wanted it to say in the size I needed. So I printed the sentiments onto card stock (Whisper White and Smoky Slate) and cut them using the Layering Squares Framelits Dies. I used two stamps on the treat bag, from two different stamp sets.

Christmas Staircase Framelits Dies © Stampin' Up!

Christmas Staircase Framelits Dies © Stampin’ Up!

In the Woods Thinlits Dies © Stampin' Up!

In the Woods Thinlits Dies © Stampin’ Up!

 

My husband and I have a big Halloween party each year with lots of decorations, yummy food, and even a costume contest. As a matter of fact, right now our house is full of boxes of Halloween decorations, as well as Christmas decorations, because the theme of this year’s Halloween party is Christmas.

Most years, after the Halloween party, we just don’t have the energy to put up a Christmas tree. I was determined to have a tree this year, so that’s why the unusual Halloween theme. It’s been very interesting combining Christmas and Halloween. All the rats and bats will have red bows around their necks, or tiny Santa hats. And I was amazed to find so many Halloween ornaments, and even black trees!

If there are any days in October when I have no blog post, it’s because the Halloween party prep has taken its toll. I will attempt to post every day, but I know from past experience that sometimes I’m just too tired from hanging cobwebs and bats and such to concentrate on creating a post, or even a project to blog about. So please forgive any gaps in my posting in the next few weeks. Thank you!

Here’s what I made:

Halloween Christmas party invitation card, In the Woods and Christmas Staircase die sets, Stampin' Up! #stampcandy

 

Halloween Christmas party invitation card, In the Woods and Christmas Staircase die sets, Stampin' Up! #stampcandy

 

Halloween Christmas treat bag, In the Woods dies, Toil & Trouble paper, Stampin' Up! #stampcandy

 

Halloween Christmas treat bag, In the Woods dies, Toil & Trouble paper, Stampin' Up! #stampcandy

 

This is a close up of the shiny red eyes peeking out from the tree.

Halloween Christmas party invitation card, In the Woods and Christmas Staircase die sets, Stampin' Up! #stampcandy

 

I forgot to take more photos during the assembly line process, but here are a few. I made 100 invitations!

100 Whisper White staircases:

Halloween Christmas party invitation card, In the Woods and Christmas Staircase die sets, Stampin' Up! #stampcandy

 

With 200 hundred little stars to adhere with Mini Glue Dots (1 on the front and 1 on the inside of each card) I found it easier and quicker to attach the stars to the strip of Glue Dots, then pull them off one by one as I needed them.Halloween Christmas party invitation card, In the Woods and Christmas Staircase die sets, Stampin' Up! #stampcandy

Ready to go in the envelopes:

Halloween Christmas party invitation card, In the Woods and Christmas Staircase die sets, Stampin' Up! #stampcandy

 

Here’s what I did:

Cut and scored with my Stampin’ Trimmer:

  • Real Red card stock (CS) cut to 5-1/2″ x 8-1/2″, then scored in half at 4-1/4″
  • Crumb Cake CS cut to 5-1/4″ x 4″
  • Basic Gray CS cut to 5-1/4″ x 4″
  • Toil & Trouble Designer Series Paper (DSP) cut to 8-1/4″ x 6″, then scored at 4″ and 8″, also scored 1/2″ from the top and bottom

Stamped with the Ready for Christmas stamp set:

  • garland in Garden Green ink onto Garden Green CS

Stamped with the Cauldron Bubble stamp set:

  • “Halloween” in Real Red ink onto a scrap of Whisper White CS *

Stamped with the Hung with Care stamp set:

  • “Merry” in Real Red ink above “Halloween” *

* NOTE: I inked up only the part of the stamp I needed. I used a Real Red ink pad, but you can also use a Real Red Stampin’ Write Marker.

Cut using Circle Punches:

  • Merry Halloween sentiment using the 1-1/4″ punch
  • hole above the sentiment using the 1/8″ punch
  • hole in the top of the Whisper White CS tree, 1 larger and 1 smaller Garden Green trees using the 1/8″ punch

Die cut using the In the Woods Framelits: 

  • larger Christmas tree shape from Garden Green CS (2 pieces), Whisper White, and Basic Black CS
  • smaller Christmas tree shape from Garden Green CS (2 pieces) and Basic Black CS

Die cut using the Christmas Staircase Thinlits: 

  • staircase from Whisper White CS and Basic Black CS
  • garland from Garden Green CS and Basic Black CS
  • ornaments from Real Red CS and Basic Gray CS
  • star from Gold Foil Sheet and Black Foil Sheet

Die cut using the Layering Squares Framelits:

  • printed sentiments for card
  • frames from Soft Suede CS and Basic Black CS

Assembled the card:

  • burnished the fold in the card base with a Bone Folder
  • Crumb Cake CS layer glued onto the front of the card base
  • Whisper White staircase, larger Garden Green tree, gold star, Whisper White sentiment, and Soft Suede frame glued onto the Crumb Cake CS layer
  • Garden Green garland adhered over the staircase using Mini Stampin’ Dimensionals
  • smaller Garden Green tree adhered over larger tree using Mini Stampin’ Dimensionals
  • Real Red ornaments glued onto the smaller Garden Green tree
  • Basic Gray CS layer glued onto the inside of the card base
  • Basic Black staircase, larger Basic Black tree, black star, Smoky Slate sentiment, and Basic Black frame glued onto the Basic Gray CS layer
  • the Basic Black garland adhered over the staircase using Mini Stampin’ Dimensionals
  • smaller Basic Black tree glued onto the larger tree
  • Basic Gray ornaments glued onto the smaller Garden Green tree
  • 2 Red Rhinestones applied to the tree, for the scary eyes peeking out from under a bough

All the information about the party (where, when, etc.) was printed on a separate piece of paper and enclosed in the envelope.

Halloween Christmas party invitation card, In the Woods and Christmas Staircase die sets, Stampin' Up! #stampcandy

Assembled the treat bag

  • burnished the folds in the DSP with a Bone Folder
  • cut away one of the tiny corner sections and the adjacent 1/2″ section using Paper Snips
  • put Tear & Tape along both of the tabs, one at the side and one at the bottom, and folded over to create the bag
  • put treat in the bag
  • folded over the top along the score lines and secured with a Galvanized Clip
  • Whisper White CS tree glued to the back of the larger Garden Green tree – this is where you can write the recipient’s name
  • smaller Garden Green tree adhered to the larger Garden Green tree using Mini Stampin’ Dimensionals
  • 2 Red Rhinestones applied to the smaller Garden Green tree, for the scary eyes peeking out from under a bough
  • Basic Black twine run through the hole in the Merry Halloween tag and tied in a knot just above it, then run through the holes in the tree
  • the twine is held on to the bag using the Galvanized Clip

Here’s the OSAT Ghouls, Goblins, and Gourds Blog Hop:

Here are today’s colors:

You can click on each one to see all the products that come in that color!

 

Here’s what I used:

Click on these images for more details and to purchase.

Price: $110.00

 

Here are the new Stamparatus Accessories!

You can now order individual accessories for your Stamparatus! (Be sure to keep an eye out for more in the future.)

 

Grid paper perfectly sized to fit the Stamparatus, for precision stamp alignment every time. (50 sheets)

Additional plates allow you to have multiple stamp arrangements ready to go! (2 plates)

Extra foam mat for photopolymer stamping. (1 mat)

Stamparatus Accessories Pack includes 2 Stamparatus plates, a foam mat, and grid paper.

Stamparatus Magnets. These rare earth magnets are strong!  They’re also brittle by nature, so be careful not to let them slam together. (2 magnets)

 

 

 

 Here’s more cool stuff you should check out:

Thanks for stopping by today, and Sweet Stamping!