Nov 10, 2020 | Cards, Christmas, Gallery, Gift Card Holder, Gifts, Holiday |
I used the Gift Wrapped Bundle (Gift Wrapped stamp set and Gift Bow Builder Punch) to make today’s project. It’s a Christmas card with a surprise pop-up gift card holder inside. I also used the Label My Fancy punch, Plush Poinsettia Specialty Paper, and Playful Pets Designer Series Paper to create the wrapped gift on the front of the card. This is one of the cards we made in my November Stamp Club gathering. We used the Gift Wrapped bundle to make 3 cards, and I will share the other two here on my blog this week.
If you are reading this in email, some photos may appear blurry, or may not appear at all. Please click here to see the post on my blog.
S gift wrapped gift wrapped gift wrapped gift wrapped
Here’s what I made:
I didn’t have a gift card to use for the photo, so I used an old hotel key card, just to show how it fits in the holder.
S
Here’s what I did:
Cut and scored with my paper trimmer:
- Garden Green card stock (CS) cut to 4-1/4″ x 11″, then scored in half at 5-1/2″
- Plush Poinsettia Specialty Paper (SP) layer cut to 4″ x 5-1/4″
- Playful Pets Designer Series Paper (DSP) strips cut to 3/4″ x 4″ and 3/4″ x 5-1/4″
- 2 pieces of Real Red CS cut to 3-3/4″ x 3-1/4″, and scored along the shorter side at 3/4″, 1-1/2″. 2-1/4″, and 3″
- Whisper White CS cut to 3-3/4″ x 3-1/2″ for the inside of the card base
Stamped with the Gift Wrapped stamp set:
- outer sentiment in Garden Green ink onto a scrap of Whisper White Thick CS
- bow in Real Red ink onto a scrap of Whisper White Thick CS
- inner sentiment in Real Red ink onto the Whisper White CS for the inside
- holly in Garden Green & Real Red beside the inner sentiment – I used Stampin’ Write Markers to color the holly stamp, then huffed on it to reactivate the ink before stamping
Cut using the Gift Bow Builder Punch:
Cut using the Label Me Fancy Punch:
- the outer sentiment, so that it was toward the right end of the label
Assembled the card:
- burnished the fold in the card base, and all the folds in the Real Red CS pieces, with a Bone Folder
- DSP strips adhered onto the SP layer using Stampin’ Seal
- SP layer adhered onto the front of the card base using Stampin’ Seal applied behind the DSP strips so they don’t show through the SP
- bow adhered onto the intersection of the DSP strips using Stampin’ Dimensionals
- outer sentiment adhered below the bow using Stampin’ Seal
- the 1/4″ section of each Real Red CS piece glued onto the inside of the opposite side, to form two skinny open-ended boxes
- one of the Real Red boxes glued into the corner of the inside of the card base, putting glue along the back and bottom sides of the box
- second Real Red box glued in front of the first one, putting glue along the bottom side of the box
- the two boxes glued together only at the very ends, leaving space between them for the gift card to be tucked down into
- Whisper White CS with inner sentiment glued onto the inside of the card base, in front of the Real Red boxes
S
Here are today’s colors:
You can click on each one to see all the products that come in that color!
S
Here’s what I used:
Click on these images for more details and to purchase. If you are reading this post in email, the product images may not show up. Please click here to see the post on my blog.
Supply List. <— Click for a clickable and printable list of the products!
S
S
Here are some helpful links:
S
Thanks for stopping by today, and Sweet Stamping!
Nov 9, 2020 | Blog Hop, Cards, Christmas, Gallery, Holiday |
Welcome to the November 2020 Candy Hearts Blog Hop! Today we are sharing Christmas themed projects. After reading my post, I hope you will hop to the next person on the list below. Be sure to hop around to see ALL the great projects the Candy Hearts have created for you!
I used the Gnome for the Holidays stamp set and Stampin’ Blends Markers to create a holiday scene on my card for today. I just love this little gnome with the ornament, and his hat with mistletoe dangling from the tip. Don’t you?
If you are reading this in email, some photos may appear blurry, or may not appear at all. Please click here to see the post on my blog.
S November 2020 Candy Hearts November 2020 Candy Hearts November 2020 Candy Hearts November 2020 Candy Hearts
Here’s what I made:
S
Here’s what I did:
Cut and scored with my paper trimmer:
- Real Red card stock (CS) cut to 5-1/2″ x 8-1/2″, then scored in half at 4-1/4″
- Whisper White CS layer cut to 5-3/8″ x 4-1/8″
- Heartwarming Hugs Designer Series Paper (DSP) layer cut to 5-1/4″ x 4″
- Real Red CS layer cut to 4-5/8″ x 3-3/8″
- Whisper White CS layer cut to 4-1/2″ x 3-1/4″
- DSP strip cut to 3/4″ x 4″
- Whisper White CS cut to 5-1/4″ x 4″ for the inside of the card base
Stamped with the Gnome for the Holidays stamp set:
- tree house in Early Espresso ink at the top of the smaller Whisper White CS layer
- gnome and sentiment in Tuxedo Black Memento ink onto the same Whisper White CS layer
Colored using Stampin’ Blends Markers:
- gnome in Old Olive, Real Red, Night of Navy, Soft Suede, and Ivory
- tree in Soft Suede, Old Olive, Crumb Cake, Real Red, Night of Navy, and Daffodil Delight
- ground and rocks in Gray Granite
Assembled the card:
- burnished the fold in the card base with a Bone Folder
- larger Whisper White CS layer glued onto the front of the card base
- DSP layer glued onto the Whisper White CS layer
- Real Red CS layer adhered onto the DSP layer using strips cut from a Foam Adhesive Sheet
- stamped layer glued onto the Real Red CS layer
- DSP strip glued onto the Whisper White CS for the inside
- Whisper White CS glued onto the inside of the card base
S
Here’s the November 2020 Candy Hearts Blog Hop:
Thank you for hopping with the Hearts today! Be sure to hop around to all the stops. You do not want to miss any of the creativity in this talented group of stampers!
S
Here are today’s main colors:
You can click on each one to see all the products that come in that color!
S
Here’s what I used:
Click on these images for more details and to purchase. If you are reading this post in email, the product images may not show up. Please click here to see the post on my blog.
Supply List. <— Click for a clickable and printable list of the products!
S
S
Here are some helpful links:
S
Thanks for stopping by today, and Sweet Stamping!
Oct 27, 2020 | Blog Hop, Cards, Christmas, Food, Gallery, Gift Wrap, Holiday, Paper Pumpkin |
Welcome to the October 2020 PPP Blog Hop! This month’s kit is called Joy to the World and it makes lovely holiday cards in two designs. I used the kit to make a card and a flatware/napkin holder for a holiday table setting. I used the Sprig Punch to add some greenery to the die cut flowers that come with the kit.
Be sure to hop around to all the stops, to see all the great alternative projects made for you by this group!
If you are reading this in email, some photos may appear blurry, or may not appear at all. Please click here to see the post on my blog.
S October 2020 PPP October 2020 PPP October 2020 PPP October 2020 PPP
Here’s what I made:
S
Here’s what I did:
Scored with my paper trimmer:
- 1/4″ cut from the right side of an open card base
- then scored horizontally 1/4″ from the bottom
- and scored vertically 1/4″ from each end
- and scored vertically 1/4″ to the right of the card’s original score line
Stamped with the Joy to the World stamp set:
- “Merry Christmas” and “Joy Joy” onto the labels in Just Jade ink
- inner sentiment in Just Jade ink onto the inside of another card base
Cut using the Sprig Punch:
- 6 sprigs from a scrap of Just Jade card stock
Cut using Paper Snips:
- 1/4″ up from the bottom along the 4 vertical score lines
Assembled the card:
- burnished the fold in the card base with a Bone Folder
- two flower die cuts adhered onto the front of the card base
- three punched sprigs tucked and adhered under the flower edges
- sentiment adhered over the center part of the die cuts using Stampin’ Dimensionals
- gold “joy” glued onto the sentiment, over the stamped words
Assembled the holder:
- burnished the folds with a Bone Folder
- folded up and adhered the bottom flaps
- two flower die cuts adhered onto the front of the holder
- three punched sprigs tucked and adhered under the flower edges
- sentiment adhered over the center part of the die cuts using Stampin’ Dimensionals
- napkin and flatware tucked inside
S
Here’s the October 2020 PPP Blog Hop:
Click the pumpkin to hop to the next stop, Elizabeth Ames of Cards by Elizabeth.
S
Here are today’s colors:
You can click on each one to see all the products that come in that color!
S
Here’s what I used, other than the kit:
Click on these images for more details and to purchase. If you are reading this post in email, the product images may not show up. Please click here to see the post on my blog.
Supply List. <— Click for a clickable and printable list of the products!
S
S
Designer Series Paper Sale ENDS THIS SATURDAY!
Don’t miss this opportunity to stock up on your favorite paper packs! Click the image to see the sale:
S
Here are some helpful links:
S
Thanks for stopping by today, and Sweet Stamping!
Oct 26, 2020 | Christmas, Food, Gallery, Gifts |
I used the Don’t Stop Believin’ stamp set and Heartwarming Hugs Designer Series Paper to decorate these Mini Coffee Cups and Mini Coffee Holder. This is a great way to give a gift of hot cocoa, K-Cups, or any small gifts. I think this elf all tangled up on Christmas lights is adorable. Actually, I think everything in this stamp set is adorable. Don’t you?
If you are reading this in email, some photos may appear blurry, or may not appear at all. Please click here to see the post on my blog. https://stampcandy.net/dont-stop-believin-mini-coffee-holder/
S Don’t Stop Don’t Stop Don’t Stop Don’t Stop
Here’s what I made:
S
Here’s what I did:
Cut and scored with my paper trimmer:
- Real Red card stock (CS) cut to 5-3/4″ x 2-1/4″ (2 pieces)
- Heartwarming Hugs Designer Series Paper (DSP) cut to 5-1/2″ x 2″ (2 pieces)
- Real Red CS cut to 2-3/4″ x 2-1/4″ (2 pieces)
- DSP cut to 2-1/2″ x 2″ (2 pieces)
- DSP cut to 1-1/4″ x 4-1/2″ (2 pieces)
- Whisper White Thick CS cut to 3″ x 5/16″
Cut using Paper Snips:
- laid the coffee holder on its side and traced around the handle onto the back of the DSP strips
- cut around the traced shapes using Paper Snips, then cut about 1/8″ off the long straight side with my Paper Trimmer
- You could lay the holder over the strip so that the straight side of the handle extends 1/8″ past the edge of the DSP strip. That will keep you from having to trim off the 1/8″ afterward.
Stamped with the Don’t Stop Believin’ stamp set:
- elf in Tuxedo Black Memento ink onto a scrap of Whisper White Thick CS
- sentiment in Real Red ink onto the Whisper White Thick CS strip
- NOTE: You may find it easier to stamp the sentiment onto a larger piece of CS, then cut it down to 5/16″.
Cut using the Stitched Nested Labels Dies:
Cut using the Warm Wraps Dies:
- DSP (plaid pattern) for the cups (4 pieces)
Cut using the Classic Label Punch:
- both ends of the sentiment, by inserting the strip into the back of the punch
Colored using Stampin’ Blends Markers:
- elf in Real Red, Just Jade, and Ivory
- NOTE: I intended to use Old Olive, but for some reason picked up Just Jade instead. I didn’t realize until it was all done.
- elf’s cheeks in Flirty Flamingo
- elf’s hair in Daffodil Delight and Mango Melody
- lights in Daffodil Delight, Real Red, Just Jade, and Seaside Spray
- to color the light string, I used the small end of a Shaded Spruce Stampin’ Write Marker
Assembled the card:
- burnished the folds in the coffee holder with a Bone Folder, and folded it to assemble
- larger DSP layer glued onto the larger Real Red CS layers
- smaller DSP layer glued onto the smaller Real Red CS layers
- DSP strips glued onto the handles of the holder
- all Real Red CS layer glued onto the sides of the holder
- elf glued onto one side of the holder, near the handle
- sentiment adhered using Mini Stampin’ Dimensionals onto the DSP layer and overlapping the elf
- ends of 2 die cut pieces of plaid DSP glued together to create a cup wrap, then the same done with the other 2 pieces
- wraps slipped onto the cups, from the bottom
S
Here are today’s main colors:
You can click on each one to see all the products that come in that color!
S
Here’s what I used:
Click on these images for more details and to purchase. If you are reading this post in email, the product images may not show up. Please click here to see the post on my blog.
Supply List. <— Click for a clickable and printable list of the products!
S
S
Only 5 More Days! Stock up now!
Click the image to see the sale:
S
Here are some helpful links:
S
Thanks for stopping by today, and Sweet Stamping!
Oct 13, 2020 | Cards, Christmas, Gallery, Holiday |
I used the Sweetest Time Bundle (Sweetest Time stamp set and Sweetest Borders Dies) to make today’s card. Even though it has a lot going on, it’s really a simple card to make. I used 2 colors of card stock, 2 colors of ink, and rhinestones. That’s it!
If you are reading this in email, some photos may appear blurry, or may not appear at all. Please click here to see the post on my blog.
S Sweetest Time Sweetest Time Sweetest Time Sweetest Time
Here’s what I made:
S
Here’s what I did:
Cut and scored with my paper trimmer:
- Whisper White Thick card stock (CS) cut to 5-1/2″ x 8-1/2″, then scored in half at 4-1/4″
- Real Red CS cut to 5-1/2″ x 2″
Stamped with the Sweetest Time stamp set:
- sentiment in Shaded Spruce ink onto the front of the card base
- candy canes and mints in Real Red ink onto the inside of the card base
Cut using the Sweetest Borders Dies:
- the Real Red CS using the candy border die
- a candy cane and a round mint from a scrap of Real Red CS
Assembled the card:
- burnished the fold in the card base with a Bone Folder
- Real Red CS border piece glued onto the front of the card base, at the bottom
- die cut candy cane and mint glued around the sentiment
- 3 Shaded Spruce rhinestones applied onto the front of the card base using a Take Your Pick tool
S
Here are today’s colors:
You can click on each one to see all the products that come in that color!
S
Here’s what I used:
Click on these images for more details and to purchase. If you are reading this post in email, the product images may not show up. Please click here to see the post on my blog.
Supply List. <— Click for a clickable and printable list of the products!
Designer Series Paper Sale!
Click the image to see the sale:
S
Here are some helpful links:
S
Thanks for stopping by today, and Sweet Stamping!
