Nov 16, 2022 | Autumn, Blog Hop, Cards, Fun Folds, Gallery, Thanks, Thanksgiving |
s
Welcome to the November 2022 Inking Royalty Blog Hop! This month’s blog hop is dedicated to showing Thanks. I used products from the Storybook Gnomes Suite Collection to create Tri-Panel Twisted Easel Card. I CASEd a card made by Marciene Ingram, but I changed the measurements and a few other things about it. We both used products from the Storybook Gnomes Suite Collection, just different ones. And I love that this Designer Series Paper (DSP) is so inclusive with black, brown, and white gnomes.
I am a paper gal. I love stamping, but I’m really all about the paper. The sentiment is the only stamped element of this card. It’s all DSP and cardstock.
We are excited to share our creations and hope you love them! After reading my post, I hope you will hop to the next person on the list below. Be sure to hop around to see ALL the great projects the Royals have created for you!
If you are reading this in email, some photos may appear blurry, or may not appear at all. Please click here to see the post on my blog.
S November 2022 Inking Royalty Blog Hop November 2022 Inking Royalty Blog Hop November 2022 Inking Royalty Blog Hop November 2022 Inking Royalty Blog Hop
Here’s what I made:
S
Here’s what I did:
Cut with my Paper Trimmer:
- Storybook Gnomes Designer Series Paper (DSP) (2 pieces snowflake pattern) cut to 4″ x 1-7/8″ then cut in half diagonally from top right corner to bottom left corner (should have 4 triangular pieces)*
- DSP (3 pieces mushroom pattern) cut to 4″ x 1-7/8″ then cut in half diagonally from top right corner to bottom left corner (should have 6 triangular pieces)*
- 4-1/4″ x 6-1/4″ Basic White Memories & More Card cut to 6-3/16″ tall
- front of the card base cut horizontally at 2-1/16″ and 4-1/8″ to create 3 flaps
- each flap scored diagonally from top right corner to bottom left corner
* I needed 3 pieces of each DSP pattern. I cut 4 of the snowflake pattern triangles because I could rotate one and have only one left over. I cut 6 of the mushroom pattern because it is directional, so I used all three bottom triangles and have the three others left over.
Stamped with the Kindest Gnomes stamp set:
- sentiment in Pacific Point ink onto the inside of the card base, at the bottom
Cut using Paper Snips:
- 3 gnomes, a bird, a bunny, and a fox from DSP – roughly cut with extra around the edges
- fussy cut a second bird for the envelope
- the bird, bunny, and fox, after they were glued onto Basic White Thick CS
Glued:
- 3 gnomes, bird, bunny, and fox to scraps of Basic White Thick CS – layered to make them stronger
Cut using the Gnomes Dies:
Cut using the Beautiful Shapes:
- the layered bird with the smallest circle die (the bird was just too small to fussy cut and pop up with Dimensionals)
Assembled the card:
- burnished the folds in the card base with a Bone Folder
- 3 snowflake DSP layers glued onto the top left triangular section of each card flap
- 3 mushroom DSP layers glued onto the bottom right triangular section of each card flap
- bottom parts of gnomes glued onto the mushroom DSP, being careful not to have any exposed glue above the bottom right triangular section of each card flap
- layered bird, bunny, and fox adhered onto the inside of the card base with various foam adhesives, so they would keep the flaps propped open
- fussy cut bird glued onto the flap of the Memories & More envelope
S
Here’s the November 2022 Inking Royalty Blog Hop:
Thank you for hopping along with us. If you get stuck during the Blog Hop, please use this line-up as a guide:
- Brian King at Stamp with Brian
- Jackie Beers at Blue Line Stamping
- Jan Dufour at Stamp Me Silly
- Candy Ford at Stamp Candy <—– YOU ARE HERE!
- Lynn Kolcun at Avery’s Owlery
- Marilyn Jones at Stamp with MJ
- Sue Jackson at Just Peachy Stamping
- Renae Novak at Blessed by Cards
- Sheryl Sharp at Sharp Notes by Sheryl
- Robin Myren at Songbird Designs by Robin
ss
Here are today’s main colors:
You can click on each one to see all the products that come in that color!
S
Here’s what I used:
Click on these images for more details and to purchase. If you are reading this post in email, the product images may not show up. Please click here to see the post on my blog.
Sale: $23.20
Price: $29.00
Supply List. <— Click for a clickable and printable list of the products!
S
Here are some helpful links:
S
Thanks for stopping by today, and Sweet Stamping!
Oct 10, 2022 | Autumn, Blog Hop, Cards, Gallery, Thanks, Thanksgiving |
s
Welcome to the October 2022 Candy Hearts Blog Hop! With Thanksgiving coming soon, today we’re sharing ideas on how to say Thanks to those you know and love. I used the Bouquet of Thanks stamp set and Design a Daydream Designer Series Paper to create an easy thank you card. You can get the Design a Daydream DSP for free with Stampin’ Rewards! Place an order of $150 or more to earn the rewards.
After reading my post, I hope you will hop to the next person on the list below. Be sure to hop around to see ALL the great projects the Candy Hearts have created for you!
If you are reading this in email, some photos may appear blurry, or may not appear at all. Please click here to see the post on my blog.
S October 2022 Candy Hearts Blog Hop October 2022 Candy Hearts Blog Hop October 2022 Candy Hearts Blog Hop October 2022 Candy Hearts Blog Hop
Here’s what I made:
S
Here’s what I did:
Cut with my Paper Trimmer:
- Soft Suede Cardstock (CS) cut to 4-1/4″ x 11″, scored in half at 5-1/2″
- Design a Daydream Designer Series Paper (DSP) layer cut to 4-1/4″ x 5-1/2″
- Basic White CS cut to 4″ x 5-1/4″ for the inside
Cut using the Stitched Rectangle Dies:
- large center from the DSP, to create a layer and a frame
Stamped with the Bouquet of Thanks stamp set:
- bouquet image in Soft Suede ink onto the DSP layer
- sentiment portion of image in Soft Suede ink onto a scrap of Daffodil Delight CS
Fussy cut using Paper Snips:
- banner from the image on Daffodil Delight CS
Assembled the card:
- fold in the card base burnished with a Bone Folder
- DSP frame adhered onto the front of the base using Foam Adhesive Strips
- DSP layer glued onto the front of the card base in the center of the frame
- banner glued over the image on the DSP layer
- Tear & Tape (about 3-3/8″ long) folded in half, then applied across the DSP layer
- 3-1/2″ piece of twine laid on the Tear & Tape and the ends tucked under the frame
- twine tied into a bow, then adhered using a couple of Mini Glue Dots
- Basic White CS glued onto the inside of the card base
S
Here’s the September 2022 Candy Hearts Blog Hop:
s
Here are today’s colors:
You can click on each one to see all the products that come in that color!
sS
Here’s what I used:
Click on these images for more details and to purchase. If you are reading this post in email, the product images may not show up. Please click here to see the post on my blog.
Supply List. <— Click for a clickable and printable list of the products!
S
Here are some helpful links:
S
Thanks for stopping by today, and Sweet Stamping!
Oct 21, 2020 | Autumn, Blog Hop, Cards, Gallery, Holiday, Thanksgiving |
Welcome to the October 2020 InKing Royalty Blog Hop! This month we are featuring Thanksgiving themed projects. I used Plaid Tidings Designer Series Paper and Cinnamon Cider card stock to create little treat boxes. I made the tage using layers of card stock and two punches: the Lovely Layers Pick a Punch and the Triple Banner Punch (aka Banner Triple Punch.)
Be sure to hop around to all the stops because you definitely don’t want to miss any of the projects this super talented group has made for you today! Scroll down to see the blog hop list.
If you are reading this in email, some photos may appear blurry, or may not appear at all. Please click here to see the post on my blog.
S October 2020 InKing October 2020 InKing October 2020 InKing October 2020 InKing
Here’s what I made:
S
Here’s what I did:
Cut with my paper trimmer:
- Cinnamon Cider card stock (CS) cut to 3-15/16″ x 3-15/16″
- Plaid Tidings Designer Series Paper (DSP) cut to 3″ x 3″
- Rich Razzleberry CS cut to 1″ x 5″
- Mango Melody CS cut to 3/4″ x 5″
- Whisper White CS cut to 1/2″ x 5″
Scored with Simply Scored Tool:
- Cinnamon Cider CS scored 1″ from each side
- DSP scored 1/2″ from each side
- NOTE: You can score using the Paper Trimmer, but for boxes I prefer to use the Simply Scored tool, just to make sure all the sides are scored exactly the same.
Cut using Paper Snips:
- the box and lid as shown in the diagram (Click on the diagram to see it larger.)
Cut using the Lovely Labels Pick a Punch:
- one end of each of the three CS strips
Stamped with the Banner Year stamp set:
- sentiment in Cinnamon Cider ink onto the Whisper White CS strip
Cut using the Banner Triple Punch:
- the opposite end of the three CS strips, after they were glued together
Assembled the box and lid:
- burnished the folds in the box and lid with a Bone Folder
- each tab of the lid glued onto the inside of the adjacent side
- box sides folded up, and tabs tucked inside the adjacent side (You can glue them if you want, but I usually leave them loose. I like the way it flops open when you take off the lid.)
- tucked in some goodies (4 Hershey kisses fit perfectly) and put on the lid
- wrapped the ribbon around the box and tied in a bow
Assembled the tag:
- Whisper White CS strip glued onto the Mango Melody CS strip
- Mango Melody CS strip glued onto the Rich Razzleberry CS strip
- notched the end with the Banner Triple Punch
- tag tucked under the ribbon on the box
S
Here’s the October 2020 InKing Royalty Blog Hop:
Thank you for hopping along with us. If you get stuck during the Blog Hop, please use this line-up as a guide:
- Brian King at Stamp with Brian
- Renae Novak at Blessed by Cards
- Pam Morris at Tap Tap Stamp
- Lynn Kolcun at Avery’s Owlery
- Joanne Brown at The Inky Dragon
- Linda Krueger at The Stamp Coach
- Sheryl Sharp at Sharp Notes by Sheryl
- Rachel Brumley at Artistic Designs by Rachel
- Ann Murray at Murray Stamps Ink
- Sue Jackson at Just Peachy Stamping
- Katie Ferguson at Cottage Paper
- Jackie Beers at Blue Line Stamping
- Candy Ford at Stamp Candy <—– YOU ARE HERE!
- Julie DiMatteo at The Paper Pixie
S
Here are today’s main colors:
You can click on each one to see all the products that come in that color!
S
Here’s what I used:
Click on these images for more details and to purchase. If you are reading this post in email, the product images may not show up. Please click here to see the post on my blog.
Supply List. <— Click for a clickable and printable list of the products!
S
S
Designer Series Paper Sale!
Click the image to see the sale:
S
Here are some helpful links:
S
Thanks for stopping by today, and Sweet Stamping!
Oct 12, 2020 | Autumn, Blog Hop, Cards, Gallery, Holiday, Thanksgiving |
Welcome to the October 2020 Candy Hearts Blog Hop! This month we’re featuring Thanksgiving themed projects. I made place cards using the Word Wishes Dies, Autumn Punch Pack, and Gilded Autumn Designer Series Paper. On one side they have an acorn trinket and copper ribbon with a die cut Happy Thanksgiving sentiment. On the other side, is space to write a person’s name for a seating arrangement, or the name of a dish for a buffet.
Be sure to hop around to all the stops on the hop! You don’t want to miss any of the projects created by this talented group!
If you are reading this in email, some photos may appear blurry, or may not appear at all. Please click here to see the post on my blog.
S October 2020 Candy Hearts October 2020 Candy Hearts October 2020 Candy Hearts October 2020 Candy Hearts
Here’s what I made:
S
Here’s what I did:
Cut and scored with my paper trimmer:
- Cajun Craze card stock (CS) cut to 4″ x 5-1/2″, then scored in half at 2-3/4″
- Gilded Autumn Designer Series Paper (DSP) layer cut to 3-3/4″ x 2-1/2″ (2 pieces)
- Very Vanilla CS layer cut to 2-3/4″ x 1-1/2″
Cut using the Word Wishes Dies:
- “Happy” and “Thanksgiving” from a scrap of Early Espresso CS
Cut using the Autumn Punch Pack:
- 2 acorns and 4 leaves from a scrap of the DSPx
Assembled the place card:
- burnished the fold in the place card base with a Bone Folder
- ribbon adhered onto one of the DSP layers using Stampin’ Seal + and wrapped around to the back
- die cut words glued onto the same DSP layer
- copper ribbon threaded through the top of an Acorn Trinket, then tied around the ribbon on the DSP, and tied in a bow (I put a Glue Dot under the bow to keep it in place. The Take Your Pick tool is perfect for this!)
- DSP layer glued onto one side of the place card base
- Very Vanilla CS layer glued onto the other DSP layer
- punched leaves and acorns glued onto the corners of the Very Vanilla CS layer
- DSP layer glued onto the other side of the place card base
S
Here’s the October 2020 Candy Hearts Blog Hop:
Thank you for hopping with the Hearts today! Be sure to hop around to all the stops. You do not want to miss any of the creativity in this talented group of stampers!
- Candy Ford of Stamp Candy <— YOU ARE HERE
- Linda Krueger of The Stamp Coach
- Pam Morris of Tap Tap Stamp
- Brian King of Stamp with Brian
- Joanne Brown of The Inky Dragon
S
Here are today’s colors:
You can click on each one to see all the products that come in that color!
S
Here’s what I used:
Click on these images for more details and to purchase. If you are reading this post in email, the product images may not show up. Please click here to see the post on my blog.
Supply List. <— Click for a clickable and printable list of the products!
Designer Series Paper Sale!
Click the image to see the sale:
S
Here are some helpful links:
S
Thanks for stopping by today, and Sweet Stamping!
